为了给您提供更的软管泵工业软管泵匠心品质产品信息，解锁软管泵工业软管泵匠心品质产品新体验，视频带你玩转每个细节！


以下是:软管泵工业软管泵匠心品质的图文介绍



众所周知软管泵在运行时，是通过一根U型附有弹性的橡胶软管来完成输送。今天小编需要强调的是，软管存放时间不宜过长，一般以一年为限。在停工期间，对装有软管的泵，若长期不用，每隔一个月需转动泵一次。以免压辊长时间压在泵管的某一处，减弱管子回弹性，影响其流量的输送。

It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.

 




无论是电话或在线咨询，只要您需要豫信致诚机械设备有限公司会及时给予专业的答疑指导，我们为您提供专业的 福建厦门工业软管泵解决方案。




挤压轮的结构设计与拖鞋结构设计：
与挤塑轮结构设计相比，胶管泵的滑靴设计能承受更高的压力，因此要根据泵的需求压力和具体应用情况来决定哪种设计适合。挤压轮设计只需在软管表面涂上硅脂，不需要额外的润滑油，因为滚筒在软管表面“滚动”。因此，该设计可考虑用于涉及食品和饮料的应用，因为在软管故障和断裂的情况下，交叉污染的概率小于浸没在润滑油中的拖鞋设计蠕动泵的概率，即使油是“食品级”，通常也 使用滚筒设计。                             




yxzc

软管泵工业软管泵匠心品质

软管泵是由泵壳、转子体、机座、软管、减速电机以及电控系统等部分组成。转子体旋转，转子体上的一对压辊沿着一根特制的胶管旋转，压辊与泵壳产生的挤压力将胶管压扁，在管子自身弹性和侧导辊的作用下，通过恢复原状产生的真空吸入物料，物料从管内排出，这样往复循环。 

The hose pump is composed of pump casing, rotor body, frame, hose, reduction motor and electronic control system. The rotor body rotates, and a pair of pressure rollers on the rotor body rotates along a special rubber hose. The squeezing force generated by the pressure roller and the pump casing will flatten the rubber hose. The elasticity of the tube and the side guide rollers restore the The vacuum produced by the original state sucks the material, and the material is discharged from the tube, so as to reciprocate.

 

点击查看豫信致诚机械设备有限公司的【产品相册库】以及我们的【产品视频库】